YOUR ELEVATOR INSTALLATION AND REPAIRS PARTNER

Passenger Elevators

Hydraulic - In ground cylinder

A type of hydraulic elevator where the cylinder is placed under the elevator in a drilled hole. It is the ideal choice for low-rise buildings where drilling is possible.

Standard Features

  • Maximum distance of 8 floors or 70 feet (about 21 metres)
  • Capacity from 2,000 to 5,500 lbs (910 kg to 2,500 kg)
  • Speed up to 150 ft/min (0.75 m/s)
  • Front opening only OR front/rear
  • NON-PROPRIETARY microprocessor-based controller
  • Independent service
  • Emergency recall phase I and II
  • Shaft access gate
  • Infrared detector
  • Emergency lighting
  • Hands-free phone
  • Includes PVC protection

Standard cab

  • 8 feet high
  • Brushed stainless steel walls #4
  • Brushed stainless steel front and doors #4
  • Full height panels covered with laminated plastic
  • 2'' x 1/4'' stainless steel handrail on inaccessible walls
  • False aluminum grid ceiling
  • Fluorescent lighting

Options

  • 100% custom-made, according to your specifications
  • Cab height greater than 8 feet
  • Vertical panels in two parts (separation at handrail level)
  • Panels covered with textured stainless steel
  • Glass walls
  • 4'' or 6'' wide handrail
  • Stainless steel stops (4'', 6'', 8'', 10'' or 12'')
  • False ceiling made of stainless steel with recessed LED lights

Advantages

  • Cost-efficient/profitable
  • Reliable and robust
  • Low maintenance costs

Hydraulic - side cylinders

A type of hydraulic elevator where two cylinders are placed on each side of the elevator. The most common choice for low-rise buildings where drilling is difficult.

Standard Features

  • Maximum distance of 4 floors or 40 feet (about 12 metres)
  • Capacity from 2,000 to 5,500 lbs (910 to 2,500 kg)
  • Speed up to 150 ft/min (0.75 m/s)
  • Front opening only OR front/rear
  • NON-PROPRIETARY microprocessor-based controller
  • Independent service
  • Emergency recall phase I and II
  • Shaft access gate
  • Infrared detector
  • Emergency lighting
  • Hands-free phone

Standard cab

  • 8 feet high
  • Brushed stainless steel walls #4
  • Brushed stainless steel front and doors #4
  • Full height panels covered with laminated plastic
  • 2'' x 1/4'' stainless steel handrail on inaccessible walls
  • False aluminum grid ceiling
  • Fluorescent lighting

Options

  • 100% custom-made, according to your specifications
  • Cab height greater than 8 feet
  • Vertical panels in two parts (separation at handrail level)
  • Panels covered with textured stainless steel
  • Glass walls
  • 4'' or 6'' wide handrail
  • Stainless steel stops (4'', 6'', 8'', 10'' or 12'')
  • False ceiling made of stainless steel with recessed LED lights

Advantages

  • Cost-efficient/profitable
  • Suitable for modernizations or new constructions
  • Low maintenance cost
  • No risk of contamination from drilling

Hydraulic - wired side cylinders

A type of hydraulic elevator where a wired pulley is attached to each cylinder. The two cylinders are placed on either side of the lift. A good alternative for high-lift buildings where drilling is difficult.

Standard Features

  • Maximum distance of 8 floors or 70 feet (about 21 metres)
  • Capacity from 2,000 to 5,500 lbs (910 to 2,500 kg)
  • Speed up to 150 ft/min (0.75 m/s)
  • Front opening only OR front/rear
  • NON-PROPRIETARY microprocessor-based controller
  • Independent service
  • Emergency recall phase I and II
  • Shaft access gate
  • Infrared detector
  • Emergency lighting
  • Hands-free phone

Standard cab

  • 8 feet high
  • Brushed stainless steel walls #4
  • Brushed stainless steel front and doors #4
  • Full height panels covered with laminated plastic
  • 2'' x 1/4'' stainless steel handrail on inaccessible walls
  • False aluminum grid ceiling
  • Fluorescent lighting

Options

  • 100% custom-made, according to your specifications
  • Cab height greater than 8 feet
  • Vertical panels in two parts (separation at handrail level)
  • Panels covered with textured stainless steel
  • Glass walls
  • 4'' or 6'' wide handrail
  • Stainless steel stops (4'', 6'', 8'', 10'' or 12'')
  • False ceiling made of stainless steel with recessed LED lights

Advantages

  • Suitable for modernizations or new constructions
  • No risk of contamination from drilling
  • Possibility of covering larger distances than other hydraulic types

Geared traction

A geared traction elevator located in a shed where the elevator is attached by cables that pass over a traction sheave until a counterweight. This type of lift is more suitable than hydraulic lifts for larger distances and capacities.

Standard Features

  • Maximum distance of 30 floors or 350 feet (about 105 metres)
  • Capacity 5,000 to 30,000 lbs (2,272 to 13,636 kg)
  • Speed up to 350 ft/min (1.75 m/s)
  • Front opening only OR front/rear
  • NON-PROPRIETARY microprocessor-based controller
  • Machine positioned on the roof in a machine room
  • Emergency brakes
  • Auxiliary brakes
  • Guillotine-style landing doors 2 manually operated sections
  • Manually operated mesh elevator cladding 6’ high
  • Independent service
  • Emergency recall phase I and II
  • Shaft access gate
  • Emergency lighting
  • Hands-free phone

Standard cab

  • 7'0" high
  • Painted steel walls
  • Painted steel ceiling
  • Fluorescent lighting

Options

  • 100% custom-made, according to your specifications
  • Machine positioned at the lower level in a machine room
  • Increase in speed up to a maximum of 1,400 fpm using gearless machine.
  • Cab height greater than 7 feet
  • Stainless steel walls
  • Handrail 2'', 4'' or 6'' wide
  • Stainless steel stops (4'', 6'', 8'', 10'' or 12'')
  • 8'' hardwood stops

Advantages

  • Possibility of covering a large distance
  • High speed
  • High capacity
  • Durable